Publicité
Les langues disponibles
Les langues disponibles
• For maximum suction keep the adjuster
closed.
• After you finish cleaning, turn the vacuum
cleaner off by pressing the ON/OFF button.
• Only then unplug from the power socket.
Using the floor tool
• The floor tool can be used for cleaning
carpets and hard floors. The floor heads pedal
should be down when cleaning hard floors (Fig
6) and in the up position when cleaning carpets
(Fig 7).
Storage
• Always unplug the machine after use.
• After use check the bag. If full, replace the
bag.
• Wind the supply cord ensuring that the plug
is not trailing on the floor.
• Store the machine in a dry indoor area only.
Maintenance
WARNING - Before undertaking
maintenance operations or adjustments
switch off machine and unplug from the
electricity supply.
The machine requires minimum maintenance
apart from the following checks by the
operator.
• Supply cord - Regularly inspect sheath,
plug and cord anchorage for damage or loose
connection.
Fig 6
Fig 7
• Body of the vacuum – Clean with a damp
cloth.
• Vacuum filter – Check the vacuum filters,
clean and replace as appropriate.
• Hose, wand and vacuum accessories – Check
and remove any debris or lint build-up from the
head.
IMPORTANT – All other servicing and repairs
should only be performed by a Tornado
Industries engineer or Authorised Service
Agent.
IMPORTANT – Should the machine fail to
operate please refer to the fault diagnosis
section in the back of the instruction manual.
If the problem / remedy are not listed please
contact Tornado Industries Customer Service
Department.
Replacing the dust bag
• Lift the top latches on the top of the machine
to release and open the top cover.
• Take out the dust bag and dispose of the full
bag.
• Position new dust bag.
• Replace the top cover by fixing in position
and securing the latches.
• The vacuum is now ready for operation.
Maintaining and replacing the filter
• After removing the top of the unit, remove the
filter (Fig 8). Install new filter.
• It is very important to keep the filters clean
to receive maximum performance from the
vacuum. Not cleaning and replacing your filters
regularly can reduce the suction power and
cause overheating.
7
Fig 8
Publicité
