Tornado TV2 SS Manuel De Fonctionnement Et D'entretien page 5

General information
When using electrical equipment basic safety
precautions should be followed including the
following.
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS
CAREFULLY BEFORE USE.
• Switch off the machine before removing the
plug.
• Keep the power supply cord clear of moving
parts. During operation hazard may occur
when running the machine over the power
supply cord.
• The power supply cord must be regularly
inspected for signs of damage. If the power
supply cord is damaged, it shall only be
replaced by the manufacturer, its service agent
or a similar qualified person in order to avoid a
hazard.
• Only replace the supply cord with the type
specified in the instruction manual.
• Do not operate the machine with a damaged
supply cord or plug, or after the machine
malfunctions or is damaged in any way.
Contact an authorised Service Agent for repair
or adjustment.
• The plug of the power supply cord must
be removed from the socket-outlet before
commencing cleaning of the machine or
undertaking maintenance operations.
• Do not kink or twist the power cord.
Guidelines for the operator
WARNING
Operators must be fully trained in the
use of the machine in accordance with
these instructions, able to perform user
maintenance and the correct selection of
accessories.
Operators should be physically capable to
manoeuvre, transport and operate the machine.
• Operators should be able to recognise
unusual operation of the machine and report
any problems.
• Only use the machine on firm level surfaces.
• Wear suitable footwear to avoid slipping.
• Wear suitable clothing to keep dry and warm.
• Where possible implement job rotation and
adequate rest periods to avoid continuous use
of the same muscles.
• Do not leave machine running unattended
• Do not smoke when using the machine.
CAUTION - This machine is for indoor
dry use only and should not be used or
stored outdoors or in wet conditions.
CAUTION - If it is suspected that there is
hazardous dust or flammable materials
stop cleaning the area immediately and
consult your superior.
WARNING Only use accessories and
spare parts provided with the machine
or those approved by the manufacturer.
The use of other accessories may impair
the safety of the machine.
• Ensure the machine is switched off before
adding or changing accessories.
Transporting the machine
CAUTION – Incorrect lifting techniques may
result in personal injury, where applicable
do not lift large and heavy machines without
assistance. We advise that the manual
handling regulations are followed.
Please refer to the technical table for details on
weight of machine.
When transporting the machine ensure that all
components, tanks and removable parts are
securely fastened, and that the supply cord and
plug are not trailing. Detach hose and wand
from machine where applicable.
Take extreme care when moving the machine
up or down steps or stairs.
Preparing for use
Electrical connection
Before connecting the machine to the power
supply, check that your supply voltage
corresponds with that marked on the rating
label.
5