Setting The Time - Teka HLC 844 C Mode D'emploi

Masquer les pouces Voir aussi pour HLC 844 C:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
KEYS
,
and
: Enable you to program the
functions.
: Enable you to start the cooking
functions.
: Enable you to stop the cooking
functions.
SYMBOLS
WARNING TIMER: Lights up when the
clock/timer is selected. Generates an
acoustic signal when the time is up. The
oven does not turn off at the end of the timer
period. This function can also be used while
the oven is cooking.
and
PROGRAMING: Lights up to
indicate that the oven is programed (cooking
time, stop time or total).
Cooking Time: This program allows
you to program the cooking time, after
which the oven will turn off automatically.
Cooking Stop Time: This setting
allows you to program the time for
cooking to stop, after which the oven will
turn off automatically.
and
Cooking Time and Cooking
Stop Time: This setting allows you to
program the cooking time and cooking
stop time. The oven switches on
automatically at the set time and
operates for the selected cooking time
(Cooking Time). It then switches off
automatically at the indicated time
(Cooking Stop Time).
SAFETY BLOCK: Indicates that the touch
keys are blocked, preventing modifications
by small children.
Other functions
HEATING: Indicates that the oven is
transmitting heat to the food.
DEFROSTING BY TIME: Lights up while
the defrosting by time function is on.
DEFROSTING BY WEIGHT: Lights up
while the defrosting by weight function is on.
The sensitivity of the touch keys adapts
continually to environmental conditions.
Make sure the surface of the control panel
is clean and free of obstacles when
plugging in the oven.
If the display does not respond correctly
when you touch the keys, unplug the oven
for a few seconds and then plug it in
again. Doing this causes the sensors to
adjust automatically so that they will react
once more to fingertip control.

SETTING THE TIME

When you plug the oven, you will see the
clock flashing 12:00.
Press
or
to adjust the hours.
EN
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hlc 8440 c

Table des Matières