Ezviz T6 Guide De Démarrage Rapide page 10

Operations
Step 1
Charge
Make sure to charge the Open/Close Detector before you begin using it for the
first time. Connect the sensor to the power socket with the power cable. The
status indicator displays red while it is charging and turns blue when charging is
complete.
A fully-charged battery can last for up to 3 months. Recharge when the
battery runs low.
Step 2
Add to the Home Sense Alarm Hub
The EZVIZ Home sense alarm hub should be purchased separately.
• Option 1 (Recommended) Use the EZVIZ App
1
Remove the Base
Detach the base from the detector by sliding it. You can see the
device QR code code located on the back of the sensor.
1