Parts And Accessories; Parts List - Honeywell VP531A Fiche Technique

VP531A,C PNEUMATIC TERMINAL UNIT VALVE
Top and Insert Assemblies (for VP531C)
— 14004898-001 (1.6 C ).
v
— 14004898-002 (2.6 C ).
v
— 14004898-003 (3.3 C ).
v
VP531A High Temperature Conversion
Rebuilding of a VP531A for higher temperature service is
possible using either a Replacement Top and Insert Assembly
or using a Stem and Disc Holder Assembly (See Table 1). If
rebuilding is done using a Stem and Disc Holder Assembly, it
is recommended that the valve actuator cover be marked
accordingly and that the valve be repacked with Teflon
packing (Kit No. 14003297-002).
Table 1. VP531A Temperature Conversion.
High Temp. Top &
VP531A Cv Insert Assembly
1004 1.6 14004898-001
1012 1.6
1020 2.3 (not available)
1038 2.3 (not available)
1046 2.6
1053 2.6
1061 3.3
1079 3.3
1087 1.6
1095 1.6
1103 2.6
1111 2.6
1129 3.3
1137 3.3
75-7251EF
High Temp. Stem &
Disc Holder
14002560-010
-001 -010
(not available)
(not available)
-002 -011
-002 -011
-003 -012
-003 -012
-001 -010
-001 -010
-002 -011
-002 -011
-003 -012
-003 -012

PARTS AND ACCESSORIES

Parts List

Available parts and repair assemblies for the VP531A,C Valve
are shown on Fig. 5.
NOTE: Valve bodies are not available separately.
Accessories
Accessories for the VP531A,C Valves are shown in Fig. 3 and
4. The position indicator (Fig. 3) mounts between the
diaphragm and spring retaining cup (Fig. 5). The vandalism
shield (Fig. 4) replaces the cover furnished with the valve.
INDICATION SCALE
(BEND DOWNWARD)
Fig. 3. 14001101-001 Position Indicator.
MAY BE USED INSTEAD OF 14003102-001
TOP ASSEMBLY WHEN 1/4-IN. PLASTIC
BARB CONNECTOR IS UNACCEPTABLE
Fig. 4. 14003648-001 Vandalism Shield.
4
C7981
1/8 NPT
PUSH-IN
RETAINER
C7982