Sauder Avenue Eight Executive Desk 416513 Mode D'emploi page 29

Step 22
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOOR may need some adjustments. Follow the text
å
below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOOR from side to side (horizontal), loosen
å
the mounting screw several turns, then turn the adjusting
screw in or out. Tighten the mounting screw after making
adjustments.
To adjust the DOOR up and down (vertical), loosen both
å
vertical adjustment screws. Move the DOOR up or down
to the desired location. Tighten the screws after making
adjustments.
To adjust the DOOR in or out (depth), loosen the mounting
å
screw one turn and move the DOOR in or out, as needed.
Tighten the mounting screw after making adjustments.
www.sauder.com/services
Mounting screw (depth)
(vertical adjustment)
416513
Adjusting screw (horizontal)
Page 29