• Press the
units into which link settings have been established for the interlocked unit.
Example:
When interlocked unit 020 is interlocked into the following units:
Indoor unit:
The contents of the retrieval will be displayed as follows:
Press the
→ Indoor unit address 001 and its type
↓
Press the
Indoor unit address 002 and its type
Press the
(3) When interlocked unit has not been set up.
CENTRALLY CONTROLLED
CHECK
ADDRESS
˚C
COLLECTIVE
GROUP
22
ventilation setting switch with the above displayed to confirm each of the other
001 (group 1)
002 (group 2)
ventilation setting switch.
ventilation setting switch.
ventilation setting switch.
˚C
ON
OFF
GROUP
FILTER
CHECK MODE
TEST RUN
NOT AVAILABLE
↔
Interlocked unit address 020 and its type
↔
Interlocked unit address 020 and its type
] will be displayed in the unit address
[
display area (temperature setting display area.)