Télécharger Imprimer la page

brondell Swash CL2200 Mode D'emploi page 31

Publicité

Les langues disponibles

Les langues disponibles

Problem
Water temp lights blinking
Seat is not heated
Wash or dryer works
without sitting on the seat
Remote does not work
Possible Cause(s)
Water supply not
connected properly
1. Seat temperature set
to OFF
2. Eco Mode is ON
Seat sensor override is
turned on
1. Remote is not paired
to seat
2. Seat is not plugged in
3. The batteries are dead
Solution(s)
Make sure that the bidet hose is
correctly connected and tight, and that
water supply shut off valve is open
1. Make sure that the seat
temperature setting is turned on
2. Turn off Eco Mode
Turn off seat sensor override
1. Make sure the remote is paired
correctly (see pg. 16)
2. Make sure the seat has power and
is plugged into a GFCI outlet
3. Insert 3 new AAA batteries
31

Publicité

loading

Ce manuel est également adapté pour:

Swash cl2200-ewSwash cl2200-rw