Publicité
Les langues disponibles
Les langues disponibles
Warm Air Dryer
(default 2 min)
1. Press/hold Dry
& Water Temp
together.
2. Water Temp light
blinks.
3. Continue to
press Dry without
releasing.
4. Press Water Temp
to select new cycle
time with LED light.
OFF=1 min
Green=2 min
Yellow=3 min
Red=5 min
5. Release to set
new time.
Gentle Wash
(default 1.5 min)
1. Press/hold Gentle
& Water Temp
together.
2. Water Temp light
blinks.
3. Continue to press
Gentle without
releasing.
4. Press Water Temp
to select new cycle
time with LED light.
OFF=30 sec
Green=1 min
Yellow=1.5 min
Red=3 min
5. Release to set
new time.
Gentle Wash
Dry Cycle
(default 2 min)
1. Press/hold Gentle
& Seat Temp
together.
2. Seat Temp light
blinks.
3. Continue to press
Gentle without
releasing.
4. Press Seat Temp
to select new cycle
time with LED light.
OFF=30 sec
Green=1 min
Yellow=2 min
Red=3 min
5. Release to set
new time.
3. Exit Expert Mode
Level 2
1. Turn ON seat
sensor - place hand
on right area of
seat.
2. Blue circle LED
light on remote
turns ON = Seat
Sensor ON.
3. Press/hold STOP
& Nozzle Cleaning
for 2 seconds.
4. Nozzle Cleaning
LED stops blinking
to indicate Expert
Mode has been
exited.
25
Publicité
