Frigidaire FFUF2021AW Manuel D'entretien page 9

4. Gently pry the hinge bearing out
from the top of the freezer door
with a flathead screwdriver (See
Figure 2A).
5. Install the hinge bearing on the op-
posite side of the door (see Figure
2B). Remove the door from the unit
by lifting the door up.

NOTE
Place the door on a padded surface to
prevent damage.
6. Flip the door over to access the bot-
tom. Using a Phillips™ screwdriver
remove the screws from the hinge
bearing and the door closer (see
Figure 3A).
7. Using a flat head screwdriver, gently
pry the closer/bearing assembly out
of the door (see Figure 3B).
8. Separate the door closer and hinge
bearing (see Figure 3C).
9. Flip the door closer over 180º and
reinstall the closer onto the hinge
bearing (see Figure 3D).
10. Using a Phillips™ screwdriver, attach
the door closer/bearing assembly to
the opposite side of the door (see
Figure 3E).
11. Remove the hinge cover by gently
bending the tabs of the cover out
while pulling the cover toward the
front of the unit (see Figure 4).
DOOR REMOVAL/REVERSAL
B
Figure 2
E D
Bottom
Figure 3
Figure 4
9
A
C
A
B