General Safety Instructions - Speedaire 53RG60 Manuel D'utilisation

UNpaCkING
Inspect:
• Handle carefully. Check the packing list to account for all items.
Visually inspect for shipping damage. If damaged, immediately
file a claim with the carrier.

GENERal SaFEty INStRUCtIONS

IMpORtaNt: Please read and save these instructions. Failure to follow
the instructions and procedures in this manual or misuse of this equipment
will VOID its warranty!
Eye protection goggles or safety glasses are always recommended
during installation and maintenance.
The dryer has been designed and constructed in accordance with the
generally recognized rules pertaining to adsorption technology as well
as industrial safety and accident prevention regulations. The equipment
design, development, production, assembly and customer service fall under
the Alpha-Pure quality control system. The dryer is state of the art. There
are, however, hazards to the body, equipment and life accompanying this
type of product if it is not operated for the purpose which it is intended by
trained and specialized personnel.
The equipment supplied is intended exclusively for drying compressed air.
Any other use or one exceeding this is considered unauthorized. Alpha-Pure
can not be held liable for damages resulting from incorrect or unauthorized
use of the equipment. Any such risk is carried solely by the end user.
Authorized use means complete compliance with all of the conditions
of operation, servicing and maintenance prescribed by Alpha-Pure in
this Instruction and Operation Manual. The dryer is only to be operated,
serviced and repaired by trained personnel who are familiar with this type
of equipment and understand fully its operation and any potential dangers.
The end user and operator must observe all National, State, and Local
industrial and safety regulations dealing with the operation of pressure
vessels under compressed air service. Also all "end user" safety rules for
the same type of service must be adhered to. The following points list
some of the important factors dealing with this type of equipment.
• Never make any structural changes to the equipment.
• Use only original spare parts and accessories.
• Never weld on any pressure vessel or modify it in any way.
• All maintenance on "pressure parts" must be carried out with the
equipment shutdown, depressurized and locked out. Any in plant
procedures or work permits regarding pressure vessels are to be
adhered to.
Disconnect or depressurize compressed air line
prior to any installation or maintenance activity.
1