Universal Spacer Installation; Griplate™ Installation - Premier Mounts AM175 Mode D'emploi

Bras pivotant universel à profil bas pour écrans plats de 37 à 63 pouces
Masquer les pouces Voir aussi pour AM175:
Table des Matières

Publicité

AM175
Universal Spacers Installation (optional)
If your flat panel has uneven mounting points, or recessed
mounting points, please use the provided universal spacers.
Si votre écran plat comporte des points de montage inégaux, ou en-
castrés, veuillez utiliser les entretoises universelles fournies.
The universal spacer may be stacked six (6) high, for a total stacking height of 1-1/2". The universal spacers must be stacked in the
direction shown above. The universal spacers must be placed between the mounting bracket and the flat panel.
The universal spacer will fit M4, M5, M6 and M8 screws sizes.
Griplate™ Installation
The Griplates™ have M4, M5, M6 and M8 hole patterns to
fit the hardware that your flat panel requires.
EXAMPLE:
If your flat panel uses M8 screws,
use the M8 mounting points.
Pre-install the mounting screws, universal
spacers and Griplates™. Once mounted, push
down to eliminate movement from the bracket,
then tighten the rest of the hardware. Repeat
this process for the installation of the remaining
mounting bracket.
Pré-installation des vis de fixation, des entretoises
universels et des Griplates™. Une fois qu'ils sont
montés, pousser vers le bas pour éliminer le mou-
vement du support, puis serrer le reste du matériel.
Répéter ce processus pour l'installation du support
de montage restant.
Installation Instructions
DIMPLES
FACING UP
DIMPLES
FACING UP
DIMPLES
FACING DOWN
DIMPLES
FACING DOWN
Page 9
Dimples
M8
M6
M5
M4

Publicité

Table des Matières
loading

Table des Matières