Publicité
Liens rapides
Publicité
Manuels Connexes pour Premier Mounts P4263F
Sommaire des Matières pour Premier Mounts P4263F
- Page 1 P4263F Installation Guide Low-Profile Mount for Flat-Panels...
-
Page 2: Weight Limit
LES SUPPORTS PREMIER MOUNTS NE GARANTISSENT PAS CONTRE LES DOMMAGES CAUSÉS PAR L’USAGE DU PRODUIT DE MONTAGE PREMIER MOUNTS À D’AUTRES FINS QUE CELLES POUR LESQUELLES IL A ÉTÉ CONÇU OU DES DOMMAGES CAUSÉS PAR DES ACCESSOIRES OU DES MODIFICATIONS NON AUTORISÉS, ET NOUS NE POUVONS PAS ÊTRE TENUS RESPONSABLES DES DOMMAGES, PLAINTES, RÉCLAMATIONS, POURSUITES, ACTIONS OU CAUSES D’ACTION DE N’IMPORTE... -
Page 3: Included Components
P4263F Installation Guide Included Components Wall Mount Bracket M6 x 120 mm (Qty 1) (Qty 2) (Qty 4) 5/16” Flat Washers Universal Spacers Lock-it Barrel Thread Depth Indicator Universal Washers (Qty 4) (Qty 8) (Qty 1) (Qty 1) (Qty 4) Finned Anchor 5/16”... - Page 4 P4263F Installation Guide Introduction Directional Mounting Arrow The Directional Mounting Arrow stamped into the top of the P4263F wall mount indicates which edge is the top. Wood Stud Installation Minimum of 2 by 4 wood stud to be used Minimum de 2 par 4 bois goujon pour être utilisé...
- Page 5 P4263F Installation Guide Place the wall plate against the wall and align it with the pilot hole. Insert one (1) 5/16″ x 3″ lag bolt and one (1) 5/16″ washer into the up per right mounting hole and tighten using a socket wrench and 1/2” socket.
- Page 6 P4263F Installation Guide Concrete Installation Two people are recommended for this step: one person to level the wall plate and another person to mark the mounting locations. Il est recommandé deux personnes pour cette étape : une personne pour niveler la sablière et une autre personne pour marquer les emplacements de montage.
- Page 7 P4263F Installation Guide Selecting the Mounting Hardware Insert a small straw or toothpick into the threaded inserts found on the back of the flat-panel. Use a pencil to mark the depth of the threaded insert on the small straw or toothpick.
- Page 8 If No, skip to the “Leveling and Locking Screw Installation” section. Universal Spacer Installation Premier Mounts’ Universal Spacers allow you to attach the mounting bracket to flat panels which have recessed or uneven mount points. Each Universal Spacer adds ¼˝ to the distance between the mounting bracket and your flat panel.
- Page 9 P4263F Installation Guide Locking and Leveling Screw Installation Leveling Screw Installation You must install the leveling screws before you attach the mounting bracket to the back of the flat panel. The leveling screws consists of two (2) M6 x 120mm screws.
- Page 10 P4263F Installation Guide Lock-it™ Security Barrel Installation (Optional) Optional security configurations include: - PCB-CSL1 (sold separately) - Padlock (Combination or Keyed; commercially available) Mounting Tab Please read the following directions to install the security barrel: 1) Remove the locking screw from the mounting bracket.
- Page 11 P4263F Installation Guide Attaching the Flat Panel to the Wall Plate This section requires two people. Cette section exige deux personnes. Do not release your flat panel until you are certain that top and bottom hooks of both mounting brackets are securely seated on the upper and lower mounting rails of the wall panel.
- Page 12 P4263F Installation Guide Utilizing the Security Barrel Your P4263F Mount includes one (1) Security Barrel which can provide additional theft deterrence for your flat panel. PCB-CSL1 Security Cable 1) Thread the cable through the hole on the security barrel. 2) Attach the PCB-CSL1 locking mechanism and secure it using the supplied key.