Table des Matières
Publicité
Mounting Bracket Installation
This kit provides a variety of screws with different lengths and diameters to accommodate most flat panels.
The number and location of mounting points will vary between manufacturers.
Le nombre et l'emplacement des joints de montage varient en fonction des fabricants.
Do NOT over-tighten the screws.
Éviter de trop serrer
Step 1. Place your flat panel screen down on a soft, flat surface and locate the threaded mounting points that are located on the back
of the flat panel.
Step 2. Determine which screw is the correct length (please see "Determining the Mounting Hardware" section).
Step 3. Attach each bracket to the flat panel by aligning the holes on each bracket with the threaded inserts on the back of your
flat panel, insert the screws through both and turn clockwise until they are fully inserted.
Page 10
les vis.
AM175
Mounting Hardware
Mounting Bracket
™
Griplate
Mounting Point
Universal Spacer
Flat Panel
Installation Instructions
Publicité
Table des Matières
