Cleaning And Maintenance - Ghibli & Wirbel SANIPRO 20.12 AP Utilisation Et Entretien

Switching off the appliance
- Push the switch (15 Fig. 10) to "OFF" to
switch off the appliance; the light switch
off.
- Remove the plug (14 Fig. 9) from the
electrical socket.
- Wind up the cable (19 Fig. 12) and hook
it into its housing (20 Fig. 12).
- Press the lever (16 Fig. 11) on the noz-
zle 1 second to discharge the pressure
inside the system.
- Place the dispensing nozzle in its hous-
ing (21 Fig. 13) on the accessory basket.
Replacing the dispensing nozzle
3 different nozzles are available to increase
or decrease the delivery of the disinfectant
solution (GREY - GREEN - ORANGE, see
Technical characteristics chapter).
- See illustrations in Fig. 14.
WARNING:
Tighten the two nozzle holders to
prevent dripping.
Transforming from nozzle to dis-
pensing gun
- See illustrations in Fig. 15.
WARNING:
Tighten the nozzle holder to prevent
dripping.
CLEANING AND
MAINTENANCE
DANGER:
Before performing any mainte-
nance operation, unplug the ap-
pliance from the electrical socket.
Daily cleaning
Cleaning the tank
- Release the levers (8 Fig. 5) and remove
the appliance head (9 Fig. 6).
- Place it on the top of a drain and empty
the liquid in the recovery tank (10 Fig.
16).
- Clean the inside of the tank with running
water and then reassemble in reverse or-
der of disassembly.
Cleaning the appliance body
- Clean the unit body with a cloth damp-
ened with water or a mild detergent.
DANGER:
Do not wash the appliance using
jets of water.
Cleaning the accessories
- Clean the accessories with running wa-
ter or specific cleaners / degreasers after
each use.
WARNING:
Do not use undiluted bleach to clean
the accessories.
ENGLISH - 4
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968