Care And Maintenance - Russell Hobbs 21703-56 Mode D'emploi

SWITCH ON
CAUTION: DO NOT open the lid during brewing as there is the potential risk of scalding.
1. Put the plug into the power socket.
2. Move the switch to I. The light will come on.
3. Shortly afterwards, coffee will start to drip into the carafe.
4. When it's done, the hotplate will keep the carafe warm. After 40 minutes, the hotplate and
appliance will shut down.
Move the switch to O.
5.
6. Unplug, and let the appliance and carafe cool down fully before cleaning, or for about 10
minutes before refilling.
7. For the best flavour, drink the coffee within 40 minutes of brewing.
BREWING STATUS GAUGE
The gauge shows the status of your coffee machine.
• The pointer will first show the brewing stage as your coffee is being made. The pointer will
move slowly clockwise within the first (long) segment during brewing.
Once brewing has finished, the pointer will move to the 0 marking. It will then show, in
•
minutes, how long the coffee has been kept warm by the hot plate (0 to 40 mins). After
about 40 minutes, chemical changes will affect the taste of the coffee.
• When the appliance shuts down, the pointer will move to the rest position.
A QUICK CUP
You can remove the carafe at any time. To prevent the filter holder overflowing, replace the
carafe on the hotplate within about 20 seconds.

CARE AND MAINTENANCE

1. Unplug the appliance and let it cool.
2. Tip the contents of the filter holder into the bin.
3. Clean the outside surfaces of the appliance with a damp cloth.
4. Hand wash the carafe and filter holder.
Descale regularly, (at least monthly).
Descale the appliance at least monthly with a proprietary descaler. Follow the instructions on
the package of descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
4