Care And Maintenance - Russell Hobbs CM 3100 Mode D'emploi

COFFEE BREWING PROGRESS GAUGE
The gauge shows the status of your coffee machine.
• The pointer will first show the brewing stage as your coffee is being made. The
pointer will move slowly clockwise within the first (long) segment during brewing.
Once brewing has finished, the pointer will move to the 0 marking. It will then show,
•
in minutes, how long the coffee has been kept warm by the hot plate (0 to 40 mins).
For best taste, we recommend drinking your coffee within 40 minutes after brewing.
• When the appliance shuts down, the pointer will move to the rest position.
PAUSE AND POUR FEATURE
You can remove the carafe at any time. To prevent the filter holder overflowing,
replace the carafe on the hotplate within about 20 seconds.

CARE AND MAINTENANCE

This product contains no user serviceable parts. Refer service to qualified service personnel.
1. Unplug the appliance and let it cool.
2. Tip the contents of the filter holder into the bin.
3. Clean the outside surfaces of the appliance with a damp cloth.
4. Hand wash the carafe, removable filter, and filter holder.
DESCALE REGULARLY
You can use a vinegar solution or a commercial descaling product designed for coffee
machines. Follow the directions on the descaling product. If you use a vinegar
solution, ensure the kitchen is well ventilated, as heating vinegar causes an
unpleasant smell.
1. Fill carafe to the 6–9 line with white vinegar with then fill the rest of the way with
water to the max line.
2. Pour the mixture into the reservoir.
3. Close the lid.
4. Replace the carafe on the hotplate.
Move the On/off switch to I.
5.
6. When the mixture has gone through the coffeemaker, let it soak for 15 minutes.
7. Empty carafe and replace it on the hotplate.
8. Fill reservoir with cold water to max line. Turn on coffeemaker for a complete brew
cycle to flush out remaining cleaning solution. You may wish to repeat this step.
9. Hand wash the carafe, removable filter, and filter holder.
6