ecofort ecoQ Sole 2000 Instructions page 52

4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
5. DO NOT immerse the heater in water.
6. Wait until the heater is completely dry before use.
Storage: Store the heater in a cool, dry location when not in use to prevent dust and dirt build up. Use
packaging carton to store.
ATTENTION:
1. Always disconnect the heater from the electricity supply and allow it to cool before attempting to
work on it.
2. If the heater has collected dust or dirt inside the unit or around the heating element, have to unit
cleaned by a qualified service agent. Do not operate the heater in this condition.
3. The only maintenance required is cleaning of the external surfaces of the heater.
4. Do not touch the heating element with bare fingers, as residue from your hand could affect the life
of the bulb. If it is accidentally touched, remove the finger marks with a soft cloth moistened with
mentholated spirit or alcohol.
5. Do not attempt to repair or adjust any electrical or mechanical functions on this heater.
6. The heater contains no user serviceable parts. Should the product suffer damage or breakdown, it
must be returned to the original seller of the product.
7. Damaged supply cords are to be replaced by the manufacturer, service agent or similarly qualified
personnel in order to avoid hazard.
8. A disconnecting switch incorporated in a fixed wiring is to be provided.
52