ecofort ecoQ Sole 2000 Instructions page 44

INTRODUCTION
The ecoQ Sole 2000 carbon infrared heaters produce instant and comfortable heat like the sun. These
robust and weatherproof heaters are designed for domestic and commercial heating applications.
Model
Voltage
Wattage
Frequency
Dimensions W x H x D
Weight
INSTALLATION
Tools Needed:
* Pencil *Hammer *Level
A wall mounting bracket is provided with the heater which has been specifically designed to allow this
product to be fitted to a wall or ceiling. Before drilling the holes check for the wall/ceiling is solid and that
there are no hidden water pipes or electric wires. The heater must be installed no less than 40 cm from side
walls and no less than 15 cm off the ceiling.
ATTENTION! The appliance must be installed on solid surfaces like concrete, wood or metal etc.
Important: Ensure that the supply cable is well mounted and that it does not come into contact with the
reflector of the heater or does not trail into the heated area. The supply cable can be fixed to the metal
mounting bracket behind the heater with plastic zip ties.
*Screwdriver *Power Drill and drill bits
ecoQ Sole 2000
220-240 V AC
2000 W
50/60 Hz
879 x 195.3 x 84.7 mm
3.0 kg
44