Specific Safety Rules - Milwaukee M18 ROCKET Manuel De L'utilisateur

• Charge in a well ventilated area. Do not block charger
vents. Keep them clear to allow proper ventilation. Do
not allow smoking or open flames near a charging bat-
tery pack. Vented gases may explode.
• Maintain charger cord. When unplugging charger,
pull plug rather than cord to reduce the risk of damage
to the electrical plug and cord. Never carry charger by
its cord. Keep cord from heat, oil and sharp edges.
Make sure cord will not be stepped on, tripped over
or subjected to damage or stress. Do not use charger
with damaged cord or plug. Have a damaged charger
replaced immediately.
• Use only recommeded attachments. Use of an attach-
ment not recommended or sold by the battery charger
or battery pack manufacturer may result in a risk of fire,
electric shock or personal injury.
• Unplug charger when not in use. Remove battery packs
from unplugged chargers.
• To reduce the risk of electric shock, always unplug
charger before cleaning or maintenance. Do not allow
water to flow into AC/DC plug. Use a Ground Fault
Circuit Interrupter (GFCI) to reduce shock hazards.
• Store your battery and charger in a cool, dry place. Do
not store battery pack where temperatures may exceed
120°F (50°C) such as in direct sunlight, a vehicle or
metal building during the summer.
SERVICE
• Have your light serviced by a qualified repair person
using only identical replacement parts. This will
ensure that the safety of the light is maintained.
• Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorized service providers.
SPECIFIC SAFETY
RULES
• Warning - The lens may get hot during use. To reduce
the risk of burns, do not touch hot lens.
• Suitable for rain and wet locations. Store indoors.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry impor-
tant information. If unreadable or missing, contact a
MILWAUKEE service facility for a free replacement.
READ AND SAVE ALL
INSTRUCTIONS FOR
FUTURE USE
FUNCTIONAL
DESCRIPTION
1
5
7
14. AC power indicator
15. Decrease brightness
button
SPECIFICATIONS
Cat. No. ..................................................... 2136-20
DC Input Volts......................................................18
AC Input Volts ....................................................120
AC Input Amps....................................................1.3
DC Output Volts ...................................................18
DC Output Amps.................................................3.1
USB Output Volts................................................5.3
USB Output Amps ..............................................2.1
Operating Temperature
Battery and Charger ....................32°F to 150°F
Battery and Tool .............................. -4°F to 140°F
M18 Li-Ion Battery Packs ..................... 18 V DC
TM
3
1. Heads
2. Extension poles
3. Extension latches
4. USB Power Outlet
2
5. Control panel
6. Upper handle
7. Leg release button
8. Carrying handle
9. Legs
10. AC outlet door
3
11. Battery bay/Charger
4
12. Battery power
indicator
13. Brightness indicator
6
8
12 13
9
10
15 16 17
11
16. Power button
17. Increase brightness
button
(0°C to 65°C)
(-20°C to 60°C)
5
14