Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8958696
ELECTROMAGNETIC FIELDS
WARNING! Stop welding immediately and move away from the welding unit if you feel faint,
dizzy, nausea or shocks. Seek medical attention.
Electromagnetic Fields (EMF) can interfere with electronic devices such as pacemakers.
Anyone with a pacemaker should consult with their doctor before working with or near a
welding unit. The following steps can minimize the effects of electromagnetic fields.
1.
Twist or tape cables together and prevent coils.
2.
Do not drape cables on your body.
3.
Keep the welding power source and cables as far away from the user as practical. A
minimum of 24 in. is recommended.
4. Connect the workpiece clamp as close to the weld as possible, but lay the welding wire and
workpiece cables away from the user.
5.
Use the lowest current setting possible during welding.
6.
Avoid long and regular bursts of energy while welding. Apply the welding wire in short
strokes and intermittently. This will prevent the pacemaker from interpreting the signal as a
rapid heartbeat.
7.
Do not allow the welding wire to touch the metal while welding.
8.
Wrap the lead cable and ground cable together whenever possible.
9.
Keep the lead cable and ground cables on the same side of your body.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing part before
operating. Failure to do so could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage. Make sure that
all items in the parts list are included.
Contents:
• Gasless MIG Welder
• Role of Flux core Wire 0.030 in.
IDENTIFICATION KEY
A
Wire Size Selector
B
Synergic Control Knob
C
Positive Outlet Socket (+)
D
Negative Outlet Socket (-)
E
Welding Torch Cable
F
Weld Power Lead
10
GASLESS MIG WELDER PN105I
• Ground Lead • MIG Torch
G
Input Power Cable
H
Fan
I
Power Switch
J
Gas Inlet
K
Ground Clamp cable (not shown)
• Regulator
Fig. 1
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
