General Safety Warnings - UFESA PV1560 Mode D'emploi

ENGLISH
Thank you for purchasing this model of the Ufesa steam
iron.
This appliance has been designed exclusively for domestic
use and must not be used for industrial purposes.
Carefully read through the operating instructions for the
appliance and safeguard them for future reference.

GENERAL SAFETY WARNINGS

Danger of electric shock or
fire!
• T he iron must not be left unattended
while it is connected to the supply
mains.
• R emove the plug from the socket
before filling the appliance with water or
before pouring out the remaining water
after use.
• T he appliance must be used and placed
on a stable surface.
• W hen placed on its stand, make sure
that the surface on which the stand is
placed is stable.
• T he iron should not be used if it has
been dropped, if there are visible signs
of damage or if it is leaking water. It must
be checked by an authorized Technical
Service Centre before it can be used
again.
• W ith the aim of avoiding dangerous
situations, any work or repair that the
appliance may need, e.g. replacing a faulty
mains cable, must only be carried out by
qualified personnel from an Authorised
Technical Service Centre.
• T his appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.
• K eep the iron and its cord out of reach
of children less than 8 years of age when
it is energized or cooling down.
• CAUTION. Hot surface. Surface is
liable to get hot during use.
• This appliance is to be connected and used in accordance with the
information stated on its characteristics plate.
• This appliance must be connected to an earthed socket. If it is
absolutely necessary to use an extension cable, make sure that it is
suitable for 16A and has a socket with an earth connection.
• If the safety fuse fitted in the appliance blows, the appliance will be
rendered inoperative. To restore normal operation the appliance will
have to be taken to an authorised Technical Service Centre.
• In order to avoid that, under unfavourable mains conditions,
phenomena like transient voltage drops or lighting fluctuations can
happen, it is recommended that the iron is connected to a power
supply system with a maximum impedance of 0.27Ω. If necessary,
the user can ask the public power supply company for the system
impedance at the interface point.
• The appliance must never be placed directly under the tap to fill the
water tank.
• Unplug the appliance from the mains supply after each use, or if a
fault is suspected.
• The electrical plug must not be removed from the socket by pulling
the cable.
• Never immerse the iron in water or any other fluid.
• Do not leave the appliance exposed to weather conditions (rain,
sun, frost, etc.).
DESCRIPTION
1. Temperature selection keys
2. Display.
3. Spray button.
4. Steam injection button .
5. Steam regulator (0-1-2-3).
6. Filling inlet with cover.
7. Spray outlet .
8. "Auto Clean" button.
9. Water tank.
10. Sole plate.
11. Filling cup.
DIGITALLY CONTROLLED ELECTRONIC IRON
The digitally controlled electronic irons do not have a temperature
control knob, however they are equipped with a display screen and
temperature selection keys and .
The display screen comprises of several icons that indicate the
status of the iron:
/ .