Publicité
Les langues disponibles
Les langues disponibles
4. CONTROLS
Before using the controls on the hood,
perform the guided configuration on the
monitor starting from the selection of the
desired language.
L
Key
Key press
L
Short
Long press with
light on
Long press with all
loads off (motor
and lights)
Short
T1
T2
Short
Long press with
light or motor on
Long press with all
loads off (motor
and lights)
T3
Short
Long press with
light or motor on
Long press with
T4
light or motor on
Short
12
T1
T2
Function
The lights alternate between high intensity, medium intensity (if
present), off.
Induction/Gas Cooktop Selection
Select the type of cooktop in use, either Induction or Gas.
The Induction Cooktop is set by default.
The Filter saturation alarm is reset.
Turns the motor on/off at the first speed.
Turns the motor on at the second speed.
24h Function
Activates/Deactivates the motor in the 24h Air Exchange mode, a
speed that allows suction of 10 minutes every hour, for a 24-hour
cycle.
Cannot be activated if the Intensive mode is active.
Activates/Deactivates the Activated Carbon Filters alarm.
Signals the saturated Metal Grease Filters alarm and the need to
wash them. The alarm is activated after 100 hours of effective
hood operation.
Signals the Activated Charcoal Odour Filter saturation alarm.
The alarm is activated after 200 hours of effective hood operation.
Turns the motor on at the third speed.
Turns the motor on at the Intensive speed.
This speed is timed for 6 minutes. At the end of this time, the sys-
tem automatically returns to the previously selected speed.
AUTO Mode
Activates/Deactivates the Automatic operating mode.
AUTO mode is deactivated whenever the speed keys are pressed.
Thanks to the presence of the Air Quality Sensor an algorithm is
able to modulate the speed based on the intake air quality level.
WARNING: The algorithm function is optimised for the most com-
mon types of cooking. Uncommon preparations may produce a
non-optimised response.
Air Quality Sensor malfunction.
Contact Technical Assistance
See the last function of the key
T3
T4
on the monitor
S1
LED
-
1 flash of LEDs T2 and
T3: confirms the Induc-
tion Cooktop selection.
2 flashes of LEDs T2
and T3: confirms the
Gas Cooktop selection.
LED T1 flashes 3 times.
Fixed
Fixed
Flashing
LED
flashes
twice:
alarm activated.
LED flashes once:
alarm deactivated.
LEDs T2 and T3 lit with
the hood off.
LEDs T2 and T3 flash-
ing with the hood off.
Fixed
Flashing
Fixed light:
AUTO mode activated.
Off:
AUTO mode deactiv-
ated.
All LEDs flash.
-
Publicité
