Setting Menus - Sylvania SDVD1037 Manuel D'instructions

Setting Menus:

In fully stop mode, press the SETUP button on the remote control, the setting menu will
appear on the screen as below. Use the Direction , , , , Numeric and ENTER buttons
to select and highlight the function you need to set or reset. Press the
or confirm the selection. After setting, press the SETUP
enter
exit.
and
IN GENERAL SETUP PAGE:
1. If the TV shape is selected, use the
ratio to match the connected TV.
2. If Angle Mark is selected, use the
If set to On, when multi-angles are available in the playing DVD, the multi-angle logo
will appear on the screen.
3. If OSD Lang (On Screen Display Language) is selected, use the
buttons to set the OSD language as desired.
4. If Screen Saver is selected, use the
If set to On, the screen saver will come on when the unit stops or the image is paused
for approximately five minutes.
5.
If Last Memory is selected, use the
If set to On, the unit will start playback from the position where the disc was stopped
last time.
If T ex t T o Speech is selected, use the
6.
If set to On, the player sounds when each button pressed.
Setting Menu
Text To Speech
Direction
Direction
Direction
Direction
ENTER
and
ENTER
and
ENTER
and
ENTER
and
ENTER
Direction and
17
ENTER
button to save the settings
buttons to set the aspect
buttons to set it On or Off.
Direction
and
buttons to set it On or Off.
buttons to set it On or Off.
buttons to set it On or Off.
button to
ENTER