Sylvania SDVD1037 Manuel D'instructions page 15

MAIN UNIT:
1. Recharge or connect the unit to AC/DC Adaptor/ Car Adaptor as previous procedure.
2. Press the OPEN button on main unit to open the CD door.
3. Insert the disc to the center spindle with label side face up and close the lid.
4. Power on the unit by sliding the POWER ON/OFF switch on the rear of unit to the ON
position.The green indicator will turn on and the unit will start playback automatically.
5. For private listening, insert headphones into the phone jack.The external speakers will
disconnect automatically.
6. To save battery power while listening to music, press the DISPLAY ON/OFF
remote control to
7. To power off, slide the POWER ON/OFF switch to the OFF position.
SECONDARY UNIT:
1. Connect the secondary unit to the main unit by the supplied DC and AV connection
cables as previous procedures.
2. Slide the POWER ON/OFF switch on the left side of unit to the ON position to power
on the secondary unit.
3. Press the DISPLAY SETUP
Press the DISPLAY SETUP button repeatedly to enter the submenu.
Press the MUTE
button to set.
the unit will sounds when each button pressed.
Press the DISPLAY SETUP button to confirm.
4. For private listening, insert the headphones into the phone jack.The speakers will
disconnect automatically.
5. To save battery power while listening to music, press the DISPLAY ON/OFF button to
turn OFF. Press again to turn it back ON.
6. To power off, slide the POWER ON/OFF switch to OFF position.
Operation
turn OFF. Press again to turn it back ON.
button to enter the display setting menu.
DISPLAY ON/OFF
or
In VOLUME submenu, set the TTS to "ON" to activate sound indication,
to move up and down,
14
button on
VOLUME +/-
and press