Lincar Milly 515S Instructions D'usage Et Entretien page 39

Instructions for back connection :
Remove the removable area inspection sheet from equipment
−
Flue pipe on the back of the equipment.
The lateral sheet can be removed to have an easily installation.
−
Insert through the hole, the exhaust tube till the up to the discharge
−
fitting of the heater, ensuring that the 'coupling involves an overlap
of the seal on the fitting itself of at least 15mm as shown in Fig B.
Insert through the hole the exhaust tube. It's possible to remove the
−
side unscrewing the front and back fixing screws, assembling it
again after the connection operations.
Make attention to wiring and electrical connections
−
Complete the connection to flue.
−
IT IT IT IT- - - - GB
39/112
GB- - - - FR FR- - - - ES ES mod. 515S-515N
GB GB FR FR ES ES
Fig.B