Human Touch Ascent Serie Mode D'emploi Et D'entretien page 4

get ready
Unpack the box
Chair
Power cord
Choose a location
When deciding where to place your Novo XT PRO, consider the following:
• Place the unit on a flat surface, away from direct sunlight or any other direct heat source (to avoid fading).
• If you wish to place the unit on a hard surface, it is recommended that you place a piece of carpet or a soft mat
underneath it to avoid damaging the floor (minimum 48" x 28").
• To accommodate the footrest when deployed, make sure the area in front of the chair is clear for at least 32".
humantouch.com
Use and care manual
Warranty terms
Spare fuses (2)
Clearance
32"
4
Getting started with your massage chair is easy!
cord, take a seat and get comfortable. You're about to experience a truly
amazing massage!
Move the chair to the desired location
CAUTION: To avoid injury to yourself and damage to the product, have two or more people move the chair.
1. Using two people, push down on the backrest and lift up on the front sides. WARNING: Do not lift the chair by the
footrest. Never manually lift the footrest.
2. Roll the chair on its casters to the desired location.
3. Gently lower the chair all the way to the floor. WARNING: Dropping the front of the chair to the floor may damage
the chair and/or floor.
Caster
Power on
1. Plug the power cord into a grounded 120-volt outlet.
2. Turn the power switch on the right-hand side of the
chair to On.
3. Make sure the remote control is secured in the
remote control pocket, then take a seat.
Simply plug in the power
X
WARNING:
DO NOT LIFT
THE CHAIR BY THE FOOTREST
Built-in USB port to
charge a hand-held
device.
Power cord
5