Sherwood RD-6505 Mode D'emploi page 28

RD-6505(A)_100223_RD-5503(g) 2010-05-11 오전 9:52 페이지 28
System Setup
1.
Turn the setup menu on.
• The setup menu will be shown.
• To turn the menu off, press this button again.
2.
Select the desired menu using the CURSOR
UP(▲)/ DOWN(▼) buttons.
SETUP ENTER / MEMO
28
TUNE
3.
Confirm your selection.
• When selecting "SYSTEM", see "SETTING THE
SYSTEM" on page 30.
• When selecting "INPUT", see "SETTING THE INPUT"
on page 32.
• When selecting "SPK SET", see "SETTING THE
SPEAKER SETUP" on page 33.
• When selecting "CH LEVEL", see "SETTING THE CH
LEVEL" on page 37.
• When selecting "PARAMTR", see "SETTING THE
PARAMETER" on page 39.
• When selecting "EXIT", the setup menu will be turned
off.
PRESET