Skytec 170.630 Mode D'emploi page 4

Dual CD Player / Mixer with Removable X-FADER
Mixer Unit Function
1. INPUT GAIN CONTROL
This control is used to adjust the input level.
2. CHANNEL HIGH CONTROL WITH KILL
Used to adjust and kill the high frequencies of the channel
Input.
3. CHANNEL MID CONTROL WITH KILL
Used to adjust and kill the mid frequencies of the channel
Input.
4. CHANNEL LOW CONTROL WITH KILL
Used to adjust and kill the bass of the channel.
5. CHANNEL LEVEL CONTROL
This slider is used to adjust the level of the signal at the left
(right) of the crossfader.
6. CHANNEL HIGH KILL
Used to kill the high frequencies of the channel.
7. CHANNEL MID KILL
Used to kill the mid frequencies of the channel.
8. CHANNEL LOW KILL
Used to kill the low frequencies of the channel.
9. MASTER LEVEL CONTROL
This control is used to adjust the level of the output signal.
10. BOOTH LEVEL CONTROL
Used to adjust the level of the booth output.
11. CROSSFADER
This slider is used to fade between the two signals at each
end of the crossfader and can be removed for easy
replacement.
12. INPUT SELECTOR
This is used to select the input type.
13. CUE SELECTOR SWITCH
Used to select which channel is to be played through the
headphones, when pressed the switch will illuminate.
14. CUE SPLIT
Used to split two channels between the left and right of the
headphones. Right = Programme / Left = Channel.
15. HEADPHONE / PAN CONTROL
Used to pan the headphone output between the cue signal
and the output signal.
16. HEADPHONE CONNECTOR
DESCRIPTION
17. HEADPHONE LEVEL CONTROL
18. MICROPHONE INPUT
19. dB SLECTOR SWITCH
20. VU METERS
21. CD FADER START
Connections
22. BOOTH OUTPUT
23. MASTER OUTPUT
24. GROUND CONNECTOR
25. LINE/CD INPUT
26. PHONO INPUTS
27. MICROPHONE INPUT
28. REMOTE CONTROL CONNECTOR
29. EFFECT RETURN INPUT
30. EFFECT SEND OUTPUT
31. PHONO 1 / PHONO 2 START STOP
Used to connect a stereo headphone to the unit to monitor the
output signal.
This control is used to adjust the volume of the headphone
output.
Used to connect a microphone to the mixer.
Use to select the required dB output for the microphone.
Displays the level of the input.
Automatic CD start/stop control function.
Unbalanced stereo output used to connect to a separate
amplifier in the DJ booth.
Unbalanced stereo output used to connect the mixer to the
amplifier.
Used to connect the earth's of the turntables to the mixer.
Line inputs for channels 1 - 4, used to connect CD players,
tuners or other line devices to the mixer.
Phono inputs for channels 2 – 4.
Used to connect a microphone to the mixer,
Used to connect and control the CD player.
Used to connect the output of an effect generator to the input
of the mixer.
Used to connect the output of the mixer to the input of the
effect generator.
Used to connect the remote start/stop to the mixer.