Skytec 170.630 Mode D'emploi page 10

1st pressing of button:
the time already played of the current title (the display "REMAIN" is extinguished)
2nd pressing of button:
the function OUTRO to replay the last 30 seconds each of the further titles (the function is not active until the next title is
played – actuate the button ►I , if necessary); the remaining time of the currently playing title is displayed
3rd pressing of button:
the remaining time of the entire CD; the bargraph (e) is extinguished, and the function OUTRO is deactivated again
4th pressing of button:
the basic setting is reached again
Bargraph
According to the display of the remaining time or the time already played of a title, the bargraph (e) additionally
indicates the time graphically by its length.
The last 30 seconds of a title are indicated by the bargraph flashing in its full length, the last 15 seconds by even faster flashing.
Note: When indicating the remaining time of the en-tire CD, the bargraph is not displayed.
Selecting the operating mode
With the button SINGLE/ CONT. , the four operating modes "Single", "Continue", "Single Relay", and "Continue Relay" can be
switched on successively,
e. g. to return from the operating mode "Continue" to the operating mode "Single", actuate the button SINGLE/ CONT. three
times.
"Single" – single title replay
After switching on, the single title replay is always activated. The display shows "SINGLE AUTOCUE" (d). After playing a title,
the unit is set to pause. Then the spot of the next title where the music starts is precisely selected (and not the time index
00:00:00).
This spot is memorized as starting point. After starting the title, it is possible to return to this starting point with the button CUE.
"Continue" – total title replay
Actuate the button SINGLE/ CONT. so many times until the display continuously shows "CON-TINUE" (c) instead of "SINGLE
AUTOCUE". The unit plays one title after the other until the end of the CD.
"Single Relay" – automatic start of the other player mechanism at the end of a title
1) Actuate the button SINGLE/ CONT. so many times until "SINGLE AUTOCUE" (d) flashes on the display. Thus, the operating
mode "Single Relay" is simultaneously activated for both player mechanisms.
2) Play a title on one of the player mechanisms. The other player mechanism must be set to pause (display II ).
3) At the end of the title, the other player mechanism starts which plays a title, then the first player mechanism starts again etc.
until a different oper-ating mode is selected or it is set to stop with the button TIME/ STOP. (Keep the button pressed for
approx. 3 seconds until the display II or ► is extinguished.)
4) By actuating the button ►II of player mechanism 1 or 2, the replay can be manually switched from one player mechanism to
the other.
5) When inserting another CD into the player mechanism set to pause, activate the operating mode "Single Relay" again with
the button SINGLE/ CONT.
Note: If the button CUE of the replayed player mechanism is actuated in this operating mode, the replay changes to the other
player mechanism. If the button CUE is kept pressed on the player mechanism set to pause, the replay changes to the other
player mechanism as long as the button is kept
pressed.
"Continue Relay" – automatic start of the other player mechanism at the end of the CD
1) Actuate the button SINGLE/ CONT. so many times until "CONTINUE" (c) flashes on the display. Thus, the operating mode
"Continue Relay" is simultaneously activated for both player mechanisms.
2) Play a CD on one of the player mechanisms. The other player mechanism must be set to stop. For this purpose, keep the
button TIME/ STOP pressed until the display (a) is extinguished.
3) At the end of the CD the other player mechanism starts which replays its CD, and then the first player mechanism starts
again etc.
4) When inserting another CD into the player mechanism set to stop, activate the operating mode "Continue Relay" again with
the button SINGLE/ CONT., and set the player mechanism to stop with the button TIME/ STOP.
Note: In this operating mode, the player mechanism set to stop does not automatically start if on the other player mechanism
the CD is on fast forward ►► until the end.
Short playing of a title beginning
1) After inserting a CD, go to the desired title with the button I◄ or ►I.
2) Keep the button CUE pressed. The title is played as long as the button is pressed.
3) After releasing the button CUE, the unit returns to the title beginning and is set to pause. Press the button ►II to start the title.
After that it is still possible to return to the title beginning with the button CUE.
Fast forward and reverse
If the title is to be on fast forward or reverse while playing a CD, keep the button ◄◄ or ►► pressed.
Notes:
a During the single title replay, the reverse run returns to the beginning of the current title. Then the unit is set to pause. If the
next title is reached with the forward run, the unit is also set to pause.
b During the total title replay, the forward or reverse run also goes beyond several titles, however, it stops at the beginning and
the end of the CD.
c In the pause mode, the current spot is constantly repeated after a forward or reverse run until the replay is started with the
button ►II or the button CUE is shortly pressed twice.
Precise selection of a certain spot
To precisely select a desired spot with activated pause, turn the control knob REV/ FWD. The unit advances and reverses so
long and so fast as the button is turned. During this process, it is possible to read the precise position on the time display and to
select it in steps of 1 frame (F = 1 /75 second).
After turning, the current spot is repeated until the button ►II is pressed or the button CUE is shortly pressed twice.
10