– Dust compartment filter (for motor
protection)
– Exhaust filter
These will need to be replaced from
time to time to ensure that your vacuum
cleaner performs efficiently.
We recommend only using genuine
dustbags, filters and accessories
with the "Original Miele" logo on
them. This will ensure that the suc-
tion power of the vacuum cleaner is
maintained, giving the best possible
cleaning results.
Dustbags with the "Original Miele"
logo on them are not made from pa-
per or paper-based materials and nor
do they have a cardboard collar. This
is why our dustbags are particularly
long-lasting and reliable.
Please note that appliance faults and
damage originating from the use of
accessories which do not carry the
"Original Miele" logo will not be
covered by the appliance guarantee.
Purchasing new dustbags and filters
Original Miele dustbags and filters can
be ordered from Miele, your Miele
dealer, or from the Miele Webshop.
Ordering the correct dustbags and
filters
Only use original Miele U dustbags with
a green collar and original Miele filters.
These are identified by the "Original
Miele" logo on the packaging or directly
on the dustbag.
An Air Clean filter and a dust compart-
ment filter are supplied with every
packet of Miele dustbags.
These can also be purchased separ-
ately from your Miele Dealer, from Miele
or from the Miele Webshop. Please
quote the model number of your va-
cuum cleaner when ordering to make
sure you get the correct filter.
When to change the dustbag (dia. 23)
Change the dustbag when the colour
marker in the dustbag change indicator
turns red, or sooner if it is no longer ef-
fective (see possible reasons for this
below).
Miele dustbags are disposable and
designed for single use only. Dispose
of the dustbag when full. Do not at-
tempt to reuse. Blocked pores in
used dustbags will reduce the suc-
tion power of the vacuum cleaner.
To check the dustbag change indic-
ator
Make sure that the vacuum cleaner is
in the vertical position.
Switch the vacuum cleaner on with
the I button on the handle and select
highest power setting.
en
41