Important - Heath Zenith DUALBRITE sl-4135-bk Mode D'emploi

TESTING
1. Turn on the circuit breaker and light
switch.
Sensor has a 1
Note:
riod before it will detect motion.When
first turned on, wait 1
Note: Meets the ENERGY STAR
when D function is off.
®
B
UAL RITE
2. Switch the on-time to TEST position and
switch to the OFF position.
®
D B
UAL RITE
TEST 1 5 10 MIN
ON-TIME
Avoid aiming the control at:
• Pools of water or objects that change
temperature rapidly, such as heating vents
and air conditioners. These heat sources
could cause false triggering.
• Areas where pets or traffic may trigger
the control.
• Nearby large, light-colored objectsreflect-
ing daylight may trigger the shut-off feature.
Do not point other lights at the sensor.
6 ft.
(1.8 m)
Maximum Range
minute warm up pe-
1
/
2
minutes.
1
/
2
® guidelines
OFF 3 6 DUSK TO
HOUR DAWN
30 ft.
(9.1m)
Maximum
Coverage Angle
The detector is less sensitive to motion di-
rectly towards it and more sensitive to across
motion.
Motion
Least Sensitive
3. Walk through the coverage area noting
where you are when the lights turn on.
Move the sensor head left or right to
change the coverage area.
IMPORTANT: Grasp the sensor only as
shown and turn the entire sensor. Any
other method may damage the sensor.
Do not force the sensor past the stop-
ping points.
150°
Rotating Sensor Head to Change
6
Motion
Sensor
Most Sensitive
Coverage Area
595-5578-10