GE JX1095STBB Instructions D'installation page 4

5 MOUNT THE DUCT UPPER
Mount the Duct Upper on the on top of the outer case
of the Microwave cover. Use the remaining 4 Sheet
Metal Screws to fasten the Duct Upper at points
indicated.
6 INSTALL THE MICROWAVE
OVEN ASSEMBLY
Plug the power cord in the wall receptacle. Slide the
microwave oven assembly gently into the cabinet,
using care not to pinch the power cord. Be sure to
keep the assembly centered as it slides back.
4
Installation Instructions
7 MOUNT THE MICROWAVE
OVEN ASSEMBLY
Mount the Assembly to the Cabinet. Using the Trim as
a template, drill pilot holes at the 4 screw holes. Use
the remaining 4 Wood Screws to fasten the Trim at
the points indicated.
8 REPLACE ANY LOOSE ITEMS
Your trim kit is now fully installed. Replace any
loose items that were removed from the inside of the
microwave oven.
Keep these installation instructions for future
reference.
Replace house fuse or close circuit breaker to restore
power at the service panel.
Printed in China
31-7000180 Rev. 1