System Specifications; Cleaning And Maintenance - Dometic COOLAIR RTX 1000 Manuel D'installation Et D'utilisation

System Specifications

Display Text
The system reports a (temporary)
F20
electrical overload.
F21 The control PCB is not working.
F22 The display board is not working.
Over temperature protection on heat
F23
sink, temperature too high.
12 System Specifications
This section shows the system specification for the RTX 1000 and the RTX 2000 parking coolers.
Cooling Capacity
Voltage
Current Consumption
Operating Temperature Range
Refrigerant
Refrigerant Quantity
CO Equivalent
2
Global Warming Potential (GWP)
Noise Emission
Dimensions
Weight

13 Cleaning and Maintenance

Use this section for the cleaning and maintenance of
your parking cooler.
NOTICE: Do not use abrasive cleaning agents or hard
objects or flammable agents during cleaning as these
can damage the unit.
I The parking cooler may be cleaned with a high-
pressure cleaner.
Clean the housing of the parking cooler and the outlet
panel occasionally with a damp cloth.
22
Description
RTX 1000 12 V
1200 W
10 A–50 A
350 g
0.5005 t
33.8 in. x 25.4 in. x 12.1 in. (860mm x 645 mm x 308 mm)
Approximately 52.8 lbs (24 kg)
Cause
The system's current power
requirement is too high.
A control PCB communication
error was detected.
A display board
communication error (fault in
the connecting cable between
the display and control board)
was detected.
Temperature too high.
12 V (10 V–15 V)
41 °F to 126 °F (5 °C to 52 °C)
R-134a
1430
< 70 dB(A)
Remove leaves and other dirt from the ventilation grilles
of the parking cooler occasionally. Make sure you do not
damage the system in the process.
Regularly check that all the elements for the air
conditioning unit are fastened.
Regularly check that the connection lines are
undamaged and secure.
Parking Cooler
Remedy
If the fault occurs again,
contact an authorized dealer.
RTX 2000 12 V
2000 W
10 A–58 A
850 g
1.21 t
Approximately 72.6 lbs (33 kg)
EN