Hilti WSC 85 Notice D'utilisation Originale page 23

3.2 Intended use
The product described is a hand-held circular saw. It is designed for cutting wood or wood-like materials,
plastics, gypsum plasterboard, gypsum fiberboard and composite materials, up to a cutting depth of 85 mm
(3.35 in).
The circular saw is equipped with a removable connector for an optional vacuum cleaner / dust removal
hose. This connector is designed to fit standard suction hoses. In order to connect the vacuum cleaner hose
to the saw, use of a suitable adapter may be necessary.
3.2.1 Possible misuse
The use of saw blades that do not comply with the specifications given in the technical data or the use of
cutting and grinding discs or blades made from high-alloy steel (HSS steel) is not permissible. Sawing metals
is not permissible.
3.3 Items supplied
Circular saw, operating instructions.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.group
4 Technical data
4.1 Technical data
For details of the rated voltage, frequency, current and input power, refer to the country-specific type
identification plate.
If the device is powered by a generator or transformer, the generator or transformer's power output must be
at least twice the rated input power shown on the rating plate of the device. The operating voltage of the
transformer or generator must always be within +5 % and -15 % of the rated voltage of the device.
Power output
No-load speed
Speed under load
Cutting speed under no load
Cutting speed under load
Cutting depth at 0 °
Cutting depth at 45 °
Cutting depth at 60°
Saw blade diameter
Saw blade arbor size
Riving knife thickness (standard)
Weight in accordance with EPTA procedure 01
Protection class
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
*314715*
314715
WSC 85
1,260 W
4,500 /min
3,100 /min
54 m/s
37.3 m/s
0 mm ... 85 mm
0 mm ... 60 mm
0 mm ... 43 mm
207 mm ... 230 mm
30 mm
2 mm
7.8 kg
II
English 17