How To Use; Seating Your Child - Munchkin Float Mode D'emploi

How to Use

SEATING YOUR CHILD

A. Unbuckle side straps by pressing harness
buckle release button. Place child in seat,
then re-connect side straps to harness
buckle.
B. Use strap adjusters to lengthen or shorten
straps, if necessary. All straps should be
snug against your child's body but not
too tight.
C. After connecting lower strap buckles in
previous step, pull upper harness Y-straps
over your child's shoulders and down to
harness buckle.
D. Use strap adjusters to lengthen or shorten
straps, if necessary. All straps should be
snug against your child's body but not
too tight.
NOTE: Upper harness Y-straps should go
over your child's shoulders like suspenders.
Attach hook clips to rings on harness buckle.
Check that Y-straps are not twisted behind
your child's back.
IMPORTANT: Always secure child using
harness when seated in chair.
12