Maintenance Schedule - Power Fist 8887176 Mode D'emploi

8887176
CLEANING
Rinse with clean water. Remove stubborn contamination with a brush and
detergent. Submerge the pump in a container with clean water and switch
on for a short time to rinse the inside of the pump.
CLEANING THE SUCTION AREA
Clean all accessible insides of the casing. Remove fibres which have wound
around the rotor shaft by opening the pressure connection. Remove
stubborn contamination with a brush and detergent.
IMPORTANT! Before using the pump again, first soak the pump so that any
possible dirt residues do not block the appliance.

MAINTENANCE SCHEDULE

1. Perform a visual inspection of the pump casing and cables for damage.
2. Check the float switch for damage by lifting and shaking the switch to
check the free movement of the contained metal balls.
3. Clean the pump thoroughly.
STORAGE
The pump should not be stored outside; the pump could get damaged from
rain and ice. Keep the pump in a cool, dry place. Do not store the pump in
direct sunlight.
REMOVAL FROM STORAGE
Before using the pump again, first soak the pump so that any possible dirt
residues do not block the appliance.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
10
1/2 HP Stainless Steel Submersible Sump Pump
For technical questions call 1-800-665-8685
V1.0