Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONTROL PANEL & OPERATIONS
On/Off Key. After powering on, the LED display shows 10:00, which is the initial
13.
default time (as shown), and the unit is ready with the normal working status. Press
On/Off key twice and the cleaning starts. The cleaning stops when the timer counts
down to 00:00. If the unit needs to be stopped before the timer runs out, press
On/Off key twice.
To prevent accidentally turning on or off the unit, the On/Off key needs to be touched within
6 seconds to turn it on or off.
mode.
– Decreasing Key.
14.
a.
When Time is used, pressing the button each time reduces the timer buy 1 minute.
b.
When Temp is used, pressing the button each time reduces the set temp. down to the
next level.
c.
When
20 minutes.
h/min – Solution Usage Timer Set Key. Each time that
15.
increased by 20 minutes. For example, 01:20 indicate that the solution is set to be used for 1
hour and 20 minutes. The maximum time that can be set is 10 hours.
Temperature Set Key. 5 set temperatures (ºC/ºF) can be selected. Press Temp button to
16.
select the temperature in the following sequence:
Timer Quick Set Key. Press Time key, LED display shows 10:00. Each press increases the
17.
time by 5 minutes.
8
flashes, indicating the unit is running under Normal Cleaning
h/min is used, pressing the button each time reduces the solution set time by
key is pressed, the timer is
Publicité
Table des Matières
