SciCan StatClean Mode D'emploi page 10

OPERATION GUIDELINES
10
Select one of the four cleaning methods
recommended later.
4
1. When the heater is needed, press
TEMP button to select one of the 5 preset
temperatures. Press Heater key twice,
flashes, indicating the heater is turned on.
When the water reaches the set temperature,
To ensure safety, the unit is designed with
dual protections. The heater will be turned
off automatically if it has been running for
50 minutes.
When debris "cloud" is no longer visible,
2.
cleaning is done. If additional cleaning is
needed, reset the timer and repeat the steps
above.
5
When cleaning is completed, switch off the power,
open the lid and retrieve the basket and the items.
Alternatively, raise and suspend the basket above
water as illustrated in the Optional Accessories
section to drain water.
Connect the hose to the drainage pipe as shown.
Open the drainage valve to drain the dirty water.
Clean and wipe the tank dry.
Close the drainage valve.
dims, indicating the heater is turned off.