Materials; Minimum System Requirements - Dometic MASTERFLUSH MF7100 Instructions De Montage Et De Service

Specifications
A
4
Dometic flush switch panel (fig . 4)
Ref .
A 3.25 in. / 83 mm
B 1.625 in. / 41 mm

4 .2 Materials

• Toilet: vitreous ceramic
• Toilet base: polypropylene
• Dometic flush switch panel: polystyrene (DFS-1F
or DFS-2F); or powder-coated aluminum (DFST)
6
B
Dimension

4 .3 Minimum System Requirements

Power draw
Circuit breaker
Electrical
Wiring
Fitting size
Supply hose ID
Water
Supply
Flow rate
Inside diameter
Discharge
Horizontal run*
Vertical run*
*Horizontal and vertical run distances are not
cumulative. Check for adequate discharge flow if
installation nears one of these limits.
I Specifications are subject to change without
notice.
Macerator Toilet
20 amps/12 V DC;
10 amps/24 V DC
25 amps/12 V DC;
15 amps/24 V DC
12 ga. (up to 25 ft./7.6 m
total circuit)
Consult ABYC guidelines
for additional information.
0.5 in. NPT – fresh water
flush toilet
0.75 in. ID – sea water flush
toilet
2.0 gpm/7.6 lpm
minimum – fresh water
flush
1.5 in./38 mm or
1 in./25 mm
40 ft./12.2 m maximum
4 ft./1.2 m maximum
EN