Teac AG-7D Manuel Du Propriétaire page 21

A
STANDBY/ON
When the POWER switch of the main unit is depressed, use
this button to turn the unit on or standby.
B
POWER
Press this switch to turn the unit standby or off.
The equipment draws nominal non-operating power from
the AC outlet with its POWER switch in the OFF position.
C
FUNCTION
Use this knob (or buttons of the remote control unit) to select
a source.
D
EXTERNAL IN
Use this button to select the source connected to the
EXTERNAL IN jacks.
E
Standby indicator
This indicator lights when the unit is in the standby mode.
When the unit is turned on, it goes off.
F Speaker indicator
This indicator lights when the SPEAKER button is set to on.
G
DIGITAL INPUTS
Use this button to select one of the digital input terminals.
H DYNAMIC RANGE
Use this button to compress the dynamic range during
playback of a disc recorded in Dolby Digital.
I
CINEMA EQ
Use this button to turn on or off the cinema equalizer.
J Display
When the unit is on, the current status of the unit is displayed.
K
Remote Sensor
When operating the remote control unit, point it towards the
remote sensor.
L Buttons for RDS function (European models only)
In FM tuner mode, use these buttons for RDS function.
RDS is available in European countries only.
M
MASTER VOLUME
Turn this knob (or press the VOLUME buttons of the remote
control unit) to adjust the master volume.
N VIDEO 3 INPUT jacks
You can connect a component such as a portable CD, game
player, etc. to these jacks.
When using these jacks, remove the cap. When you don't use
them, leave the cap in place.
O
BAND
Use this button to select FM or AM.
P
TUNING/PRESET
In the manual tuning mode, use these buttons to tune in a
station.
In the preset tuning mode, use these buttons to select a preset
channel.
Q
FM MODE
In FM tuner mode, use this button to select stereo or
monaural.
R
MEMORY
Use this button to store preset channels into memory.
S
TUNING MODE
Use this button to select a tuning mode.
T
PARAMETER
Use this button to change parameters of DOLBY PRO LOGIC IIx
MUSIC, DOLBY VIRTUAL SPEAKER and DOLBY HEADPHONE.
U STEREO
Use this button to select stereo mode. Sound is output only
from the front speakers (and the sub-woofer).
V
Power indicator
This indicator lights when the unit is on.
W DSP
Use these buttons to select a surround mode.
X
AUTO
Use this button to change the decoding mode of digital
signals.
Y SPEAKER SETUP
Use this button to start speaker configuration.
Z
SELECT/LEVEL
Use these buttons to adjust the level of each speaker, etc.
a TONE MODE
Use this button to select a tone mode.
b
CHANNEL SELECTOR
Select a speaker by pressing this button repeatedly, and adjust
the level using the LEVEL buttons.
c SPEAKER
Use this button to turn on or off the speakers.
on : Sound is output from the speakers.
off : No sound is output from the speakers.
d
PHONES
For private listening, insert the headphones plug into this jack,
and adjust the volume by turning the MASTER VOLUME knob.
ENGLISH
21