Midea MLH27N4AWWC Instructions D'installation page 21

Problem Possible Cause
Leaking water Fill hoses or drain hose is
(cont.) improperly connected
Household drain may be
clogged
Dispenser clogged
Incorrect use of detergent • Use HE and correct
Dispenser box crack
Clothes too Load is out of balance
wet
Pump clogged
Overloading
Drain hose is kinked or
improperly connected
What To Do
• Make sure hose
connections are tight at
washer and faucets and
make sure end of drain
hose is correctly inserted
in and secured to drain.
• Check household
plumbing. You may need
to call a plumber.
• Powder soap may cause
clogs inside the dispenser
and cause water to leak
out the front of the
dispenser. Remove drawer
and clean both drawer
and inside of dispenser
box. Please refer to
Cleaning section.
amount of detergent.
• If new installation, check
for crack on inside of
dispenser box.
• Redistributes clothes and
run drain & spin or rinse
& spin.
• Increase load size if
washing small load
containing heavy and
light items.
• The machine will slow the
spin speed down to 400
rpm if it has a hard time
balancing the load. This
speed is normal.
• See page 18 on how to
clean the Pump Filter.
• The dry weight of the
load should be less than
18 lbs.
• Straighten drain hose and
make sure washer is not
sitting on it.
21