Regulation Of The Fingerlike - Gram TCamel S Série Manuel D'utilisation

REgULATION Of THE fINgERLIkE

Regulation of the fingerlike handle's three positions (ascend, middle,
descend).
On the pallet truck, you will see the fingerlike handle, which can be operated
on three positions:
Ascend
Middle
Descend
When the operation has been completed, the handle should be put on the
middle position. The position of the fingerlike handle has been adjusted
before leaving factory, and if you need to change it, please do as the following
steps:
If you push the handle down in the "middle" position, the fork rises,
•
please turn the screw round unloading board clockwise until the fork
does not ascend when you press the handle.
If you push the handle down in the "middle" position, the fork declines
•
please turn the screw round on the unloading board anti-clockwise until
the fork does not descend when you press the handle.
With the fingerlike handle in the "descend" position, the fork does not
•
descend, please turn the screw round on the unloading board clockwise
until the fork descend with the handle on that position. Then according
to 3.1 and 3.2, Check the middle (running position)to ensure the screw in
the right position.
With the fingerlike handle in the "ascend" position, the fork does not
•
rise, please turn the screw round on the unloading board anti-clockwise
until the fork ascend with the handle on that position.
--
--
--
9