Keypad Description - Gram TCamel S Série Manuel D'utilisation

1. Zero status indication, Displayed when the scale is at the centre
of its zero band.
2. Tare status indication, Displayed when the weight has been tare.
3. Simple counting indication, Displayed when the scale is in simple
counting mode.
4. Unit indication, Displayed when the scale is in g or lb unit.
5. Kg indication, Displayed when the scale is in kg unit.

kEyPAD DESCRIPTION

ZERO key, in the menu use as "UP" key. When the weigh pan is empty
(free of load) and the display is not showing zero, press the "ZERO" key to
zero the scale.(The weight can be zero is only at the 2% of Max. capacity).
TARE key, in the menu use as "RIgHT" key. The tare function will not
operate during the following conditions:
• When the scale powers on if the weight is negative and after a
container is placed on the weigh pan if the weight is still below zero.
• The tare value is over the full scale capacity.
UNIT key. Use this key to switch between kg and g or lb units.
fUNCTION key. Use this key to choose the functions: Simple counting,
Check weighing, accumulation...
PRINT key, in the menu use as "confirm" key. Use this key to print
data when the printer is connected.
19