Operating The Scale; Simple Counting Mode; Hold Weighing Mode - Gram TCamel S Série Manuel D'utilisation

OPERATINg THE SCALE

Simple Counting Mode

1. Press
2. Press
place the number of samples on the weighing pan. The number should
match the options for parts counting. i.e., 10, 20, 50, 100, 200 pieces.
3. Then press
4. Press
unit weight and shows total weight then back to simple counting mode.
5. After display shows unit weight and total weight the scale back to simple
counting mode, user can continue use this mode or press
return to weighing mode.
6. Press

Hold Weighing Mode

1. Press
2. Press
3. When choose this mode, user needs to press
are put on pan and the scale is stable.
4. Take off the object and press
5. Press
20
key once, the display will show "PCS 10".
key to choose sample numbers from 10, 20, 50 to 100 pcs, then
key to start the simple counting mode.
key to check the unit weight and total weight, LCD will shows
key to exit simple counting mode and move back to weighing mode.
key three times, the display will show "Hold".
key to start the HOLD mode.
key to exit from HOLD mode and move back to weighing mode.
key after the objects
key the until back to zero.
key to