Charging The Battery; Advanced Functions; Checking Battery Voltage; Auto Off Setup - Gram TCamel S Série Manuel D'utilisation

CHARgINg THE bATTERy

• When the low battery symbol is on, it means the power of scale is low
needs to change the battery or plug-in the adaptor to recharge the battery.
• To the right of the display is a LED to indicate the status of battery
charging. When the scale is plugged into the mains power the internal
battery will be charged. If the LED is green the battery is being charged.
If it is red indicates the battery is increasing the charge level. Continue to
charge overnight for a complete re-charge.

ADvANCED fUNCTIONS

Checking battery voltage

When scale is on and at zero and stable, long press
seconds (beeper sounds) then release the key, LCD sill shows the battery
voltage for 3 seconds ten back to weighing mode.

Auto Off setup

When scale is on and at zero and stable, long press
off setup, use
and back to weighing mode.
On. Enable (scale will turn off after 10 mins haven't been use; to be
Off. Disable.
22
key to enable or disable, then press
able to use the scale, needs to turn on the on/ff switch).
key around 3-5
key enter the auto
key to confirm