Second Point Calibration - Gram TCamel S Série Manuel D'utilisation

Second point calibration

(unit is in kg)
LCD shows [00.000]. The decimal point was set as 3 digits. (this depends on
what user sets in the last moves). Put on the weights on the pan which will
be calibrate as second point, then use key to move the flashing digits to
the right in circle to select the digits that will increase the number.
Press key to increase the number until the number appears, then repeat
the above moves until LCD shows the numbers which is equal to the weights
put on the pan, then wait until the scale is stable then press key, scale
will move into the weighing mode then press "calibration" key to confirm
calibration finish.
26