Debugging Method Of The Forklift Scale - Gram TCamel S Série Manuel D'utilisation

3. When pulling the truck, please keep the handle on the middle position.
So it is easy to move and reduce the rebound from the piston to handle.
Moreover it protects the liquid seal and piston components and extends
the service life of truck.
4. One without skilled training isn't allowed to operate it.
5. nspect the truck including the wheels, handles, fork and rocker before
operating.
6. Do not operate it on the slantwise ground.
7. Do not carry man on the fork.
8. It's better for the operator to dress protective gloves and shoes.
9. In the process of lifting and transporting cargo, all the workers concerned
should keep away from the fork at least 600 mm.
10. Pay attention to the focus of the objects, and avoid inclining and deviating
(see Figure 2 B).
11. Do not overload.
12. Operate it cautiously when in special circumstance and location.

Debugging method of the forklift scale

1. Disconnect the monitor's plug.
2. Adjust every regulation resistance by digital multimeter "200 Ω" to make
the resistance "10 Ω".
Debugging method: connect one pen of multimeter to "E +" of the "OUT",
the other pen, respectively, to "E +" of A, B, C, D then connect the other
11