Instruction For Use - Gram TCamel S Série Manuel D'utilisation

When weighing the
show value on the
7
front is big and the
back small fork.
When weighing the
show value on the front
8
and back different from
each other.

INSTRUCTION fOR USE

1. Please keep the scale in a cool dry place. Do not store it at high
temperature.
2. Do not allow any liquids to come into contact with the scale. If necessary
wipe the scale with a dry soft clothe.
3. Avoid objects impacting with the scale. Do not drop loads onto the scale
or subject the weighing pan to any strong shock loads.
4. The load placed on the weigh pan must not exceed the maximum
weighing capacity of the scale.
5. If the scale is not going to be used for some time, please clean it and
store it in a plastic bag in dry conditions. A desiccant sachet may be
included to prevent any moisture build up.
- A phenomena of plate
collision near the sensor
at the back of the fork.
- Resistance on the
terminal board need to be
adjusted.
- Debug as Chapter VI of
the brochure "forklift
debugging method" and
recalibrate.
- Open the board to
check the collision, if
necessary, polish or
boost the sensor.
- A sensor fault.
- Recalibrate after
replacement of the
sensor.
15