Volpi PV400 Mode D'emploi page 28

Warning!
Don't touch blade when the battery is connected to the tool.
Keep a minimum distance of 15cm between the blades and any part of your body.
Keep other people at a minimum distance of 1.5m
Warning!
In particular situations of very hard use, the blade and the handle could reach high temperatures. It is
recommended to handle the pruner with care, using protective gloves.
Sound and vibration measurements:
Sound pressure level: < 70 dB(A)
Total vibration value: < 2.5 m/s
5. Purpose
The device design only uses for cutting hedge, brush, and branch.
Other not suitable work may be damage tool and yourself.
The equipment design for adult use, don't use in rain or damp brush. Vendor is not responsible for any
damage due to not following the instructions in this manual.
Check blade sharpening before to use the tool. Blade should be sharp before to use. Damages due to
use of a blunt blade are not covered by warranty.
6. Function description
The tool is made in special class steel. Strong blades, light design to easy operation with single hand.
The blade can be very close to branch, cutting softly, not damaging plant. In case of any abnormal
operation, just loose trigger, blade will open to maximum position to reduce damage.
28
2